Using Flexible LED Tape with Starscape Products

LED tape is very good at creating a linear light effect across a surface with no visible gaps. All our tape is good quality, comes with an 18 month guarantee and full documentation, telephone and email support

LED colour changing tape

Finish off your fibre optic project with a real WOW. Our powerful and dramatic colour changing tape is easy to install and can be controlled by home automation, remote handsets, apps for your phone, or a stylish wall plate controller.

RGB Colour changing 12v LED tape – SMD5050

Operating Voltage: 12v DC

5 metre length 360 LEDs, 60 per metre

Power Consumption: 14.4 watts per metre

Beam angle: 120°

Dimensions: 500 x 10 x 2 mm

IP20

LED single colour tape


If you don’t need colour changing, then our single colour tape is both powerful, economical to run and easy to install. We stock cool white and warm white, with other colours available on request.

Single colour 12v LED tape – SMD5050

Operating Voltage: 12v DC

5 metre length 360 LEDs, 60 per metre

Power Consumption: 4.2 watts per metre

Beam angle: 120°

Dimensions: 500 x 10 x 2 mm

Colour temperature and wavelength: White 6500K, Warm White 3200K.

IP20

How do I control the tape? Scroll down for options.

Both the single colour and colour changing tape can be controlled by Home Automation.

Most automation systems have a DMX conversion module as an add-on.

To configure the LED tape for home automation you will need from Starscape: DMX modules and matched power supplies

DMX module

12v DC input
12v DC output at 180 watts

Power supply

We have a range of power supplies:
12v 48 watts
12v 100 watts
12v 150 watts
12v 300 watts

Remote control for colour changing tape
Colour changing, and single colour tape can be operated by remote control.
Our systems can control single zone installations, multi zones all showing the same colour, and multi zones displaying different colours and effects.

Remote


Single or multi-zone remote control.

Receiver


180 watt single / multi zone receiver.

Wall plate controller


This stylish controller can be hard wired using Cat5 cabling, or configured to work wirelessly with multiple receivers.

The controller is compatible with a standard one gang dry lining backbox.

As all installations are different, the best way to get the system you want at the best value is to contact us for a no obligation quotation.


We’re happy to discuss requirements and then draw a plan with the various components laid out in an easy-to-understand format.

Infinity panel system

Get in touch