Customer project 46 - Illuminated Glass Tiles


This is a project which demonstrates a technique which has great potential in the bathroom and kitchen,

but which isn't particularly difficult to implement. Customer Projects 27 and 41 demonstrate

how optical fibres can be installed so as to create bright "stars" in the grout between wall or floor tiles,

but this latest project has the fibres providing indirect illumination, lighting glass tiles from behind.

The fundamental technique is the same. Optical fibres run from the light source, located possibly

in the loft above or an airing cupboard, and down the wall behind the tiles. Obviously the fibres

need to be in place before you start fixing the tiles - you can temporarily tape the fibre in place before starting to apply the tile adhesive.


A hair dryer or heat gun is used to - carefully - soften the optical  fibres to facilitate bending and twisting.



The light from the coiled fibre optic end illuminates the tile.



The fibres are taped to the wall before the mat of mosaic tiles is fixed in place and the fibre ends protrude through gaps.

Once the tile adhesive has set the fibres are cut back to a convenient length.

You can settle for just using the end point lighting effect, but a better idea is to combine this with some sideglow effect.

A heat gun/hair dryer is used to soften the last few centimetres of each fibre (top photo), allowing it to be wound into a tight coil.

The heat damages the fibre cladding with the result that light leaks through the damaged area,

producing a more even level of illumination behind the tile than would be the case if only end point light was used.

Normally, we'd recommend caution when using hot melt glue with polymer fibre optics since the

heat from the glue is inclined to damage the fibre. However, in this case doing a bit of damage

is a good thing since it increases the amount of light escaping from the side of the coiled fibre.

Equally, the act of using a heat gun (pictured above) to coil the fibre end damages the fibre cladding

and enhances the sideglow effect. What's more, the flattened blob of hot glue actually helps

to diffuse the light, helping to create a more even flow behind the glass tile. The hot glue also serves to secure the glass tile in place.

Once the glass tiles are fixed, it's just a matter of grouting the tiles.

Do bear in mind that if your glass tile has a coat of paint at the back this will need to

be removed to allow light to penetrate from behind. There are 20 illuminated glass tiles in this display,

but a single light source could illuminate hundreds if so required.


Starscape's optical fibres illuminate this mosaic wall tile display


The glass tiles change colour as the colour wheel in the fibre optic light source rotates through its half dozen colours.


The round glass tiles are interspersed among the ceramic tiles.  

Each glass tile is illuminated by a single 1mm polymer optical fibre. The light source is located in the loft above,

and the fibres run down behind the tiles. Click here to see a Video of this effect.

It is also possible to illuminate more than one tile from a single fibre by damaging part of the

fibre at a point other than the end. However, this means that the intensity of the light further along

the fibre will be reduced, so you'd need to do some experiments before committing yourself to this approach.

There's no electricity in the glowing tiles, so no problem using them in the shower enclosure, and there's only the one bulb to ever change.

Back to Projects


Orders under £30.00 are usually delivered by Royal Mail first class. Please allow up to 5 days for delivery.
Over £30.00 delivery is by next working day courier. For Saturday deliveries there's a £20.00 surcharge.

For our customers' complete peace of mind Starscape’s online credit card transactions are handled by HSBC bank. The shopping cart (Roman Cart) is verified by VeriSign, and should you wish to complete your purchase over the phone we have computer systems and card information handling procedures verified by Security Metrics.

Links to the latest projects:

Why not browse through some of our 100+ project pages for ideas and inspiration?

Bathroom fibre optic lighting

Project 91

Wildlife projects at Starscape:

Wildlife at Woodside

Often seen in the surrounding wood, these three deer ventured a lot closer.

Wildlife at Woodside.....Read more

Get in Touch

  • Phone:
    01289 332900
  • Email:
  • Address:

  • Woodside
    TD15 2SY
    United Kingdom