The Galaxy Star Ceiling

Order on line or by phone. For more information visit the Galaxy link under star ceilings main navigation bar or click here.

 


 

 

LED technical

Power consumption, size and brightness.

70 cm RGB rigid strip: 7.2 watts. 30 LEDs 12V DC 60 Lumens. L700 x W8 x H4 (mm)
Full spec. in Word or PDF


3 metre RGB ribbon tape: 40 watts. 180 LEDs. 12V DC. 1024 Lumens. Beam Angle: 120° L3000 x W11 x H2 (mm)
Full spec. in Word or PDF


6 metre single colour ribbon tape: 45 watts. 360 LEDs. 1512 Lumens (one roll, white) Beam Angle: 120°. 12V DC. L6000 x W11 x H2 (mm) 2-pin power connector.
Full spec. in Word or PDF


RGB flex strips: 2 Watts. 36 LEDs. 12V DC. 30 Lumens. L360 x W12 x H4 (mm) 4-pin power connector.
Full spec. in PDF

Single colour flex strip: 1.5 watts. 24 LEDs, 30 Lumens. 12V DC. L360 x W19 x H16 (mm). 2-pin power connector.

Full spec in Word or PDF


When calculating power usage to match a transformer always leave 20 % in reserve. For example 8 x 6 watt rigid strips will consume 48 watts. Add the reserve of 20% - 6 watts - for a total of 54 watts. In practice this means you would need a 60 watt transformer.

2 x 6 metre single colour ribbon flex tapes will use 90 watts: add the 20% reserve 18 watts total 108 watts. You will need a 200 watt power supply.

 

 

Wiring diagrams

Wiring diagram for longer run of RGB LED rigid strips using power expansion modules.





Diagram of 8 strips and 60 watt transformer utilising 4 core cable to negate voltage drop.